Adjustable Swivel Hanger for FP

View Products

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread. As the name suggests, fully threaded studs have full body coverage with threads for full engagement of the matings nuts or similar parts.

View Products

Designed to rigidly brace piping systems subjected to longitudinal seismic loads and bracing pipe against sway and seismic disturbance.

View Products

Designed to rigidly brace piping systems subjected to longitudinal and lateral seismic loads. May also be installed to brace piping systems subjected to vertical seismic loads. For vertical load capacities, reference OSHPD OPM-0351-13.

View Products

Designed to steady a horizontal run of pipe against a perpendicular section of strut.

View Products

A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level.

View Products

Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. A wide range of pipe clamps are available for various applications.

View Products

Multi-functional attachment to structure or braced pipe fitting.

View Products

A U-bolt is a bolt in the shape of the letter U with screw threads on both ends. U-bolts have primarily been used to support pipework, pipes through which fluids and gasses pass. As such, U-bolts were measured using pipe-work engineering speak. A U-bolt would be described by the size of pipe it was supporting. U-bolts are also used to hold ropes together.

View Products

Contact us for more information.

Contact Us
561.354.0114